RTF Mini-20A (Blue Series) BLHELI-(ONESHOT)

Dampened Light support OneShot125 Compatible! Specifications BlHeli: Dampend light enabled and OneShot125 compatible Max continuous load: 20 amps Burst Current: 30A/30sec BEC: 5v/1amp max Lipo Cells: 2 to 4 cells Processor: Atmel Refresh Rate: 400-600hz (600hz past 1500) Throttle Signal: Upto 620hz Default timing: Medium ((Recommended for 2204) (Med-High Recommened for 2206)) Servo Cable Flashable – via Afro Stick, MT1501, Or 1 wire Flasher (Arduino Nano) Dimensions 27mm L x 14mm W x 5mm H 10g with wires

• 4g no wires (bare)
• Flashed with newest BlHeli firmware installed and tested!

  The Mini 20A features a UBEC and is the smallest 20A ESC With a BEC built in for the builds when one do not have to worry about another 5v power suppy to power there flight controller.

  Dampened Light supported – OneShot125  autodeacte Compatible

  Specifications

  • BlHeli: Dampend light supported and OneShot125 compatible
  • Max continuous load: 20 amps
  • Burst Current:  30A/30sec
  • BEC: 5v/1amp max
  • Lipo Cells: 2 to 4 cells
  • Processor: Atmel
  • Refresh Rate: 600hz
  • Default timing: Medium ((Recommended for 2204) (Med-High Recommened for 2206))
  • Servo Cable Flashable – via Afro Stick, MT1501, Or Beast-Mode Flasher (Arduino Nano)
  • 27mm L x 14mm W x 5mm H
  • 10g with wires
  • 4g no-wires (bare)